Job Detail


Posted on Apr 20, 2021
Location: Fahaheel, Kuwait
Industry: Oil / Gas / Petroleum
Job Type: Full Time/Permanent
Education: Diploma
Experience: 5 Years

Job Description

 The driller should inspect the rig and make sure that all bearings are being greased.
 The driller should explain to his crew their job and check frequently to see that they do it properly.
 The driller should never break the Kelly off with the pump engaged.
 Everyone on a crew should know how to stop the draw works in case of an emergency. This should be determined by actual test.
 The driller should stay at the control panel when jetting is being done.
 The driller should stay on the brake when the derrick man is greasing the crown and block or conducting other maintenance work in the derrick.
 The driller’s job includes seeing that all workers carry out safety rules. Examples include making sure that rope on the cutline doesn’t have any broken strands or frays and ensuring that the tongs have good snub lines and a good die.
 When going in the hole, the driller should be careful of hitting bridges.
 When the crew is working on the draw works chain, the driller should be at the controls. Locko out procedures should be used.
 When greasing the rig, the driller should be sure that the men have removed all tools (grease guns) and closed covers before starting the draw works.
 Always keep tools out from around the control panel and brake.
 The driller should never allow an employee to operate the draw works hoist unless that person fully understands its operation.
 The driller should not allow a man to work if he is not fit for duty.
 The driller should not keep an employee if he is an unsafe worker.
 The driller should instruct experienced personnel to explain the Company’s safety rules to the new employees.
 When picking up drill collars off the rack, lift nipples should be hammered up tight.
 Investigate thoroughly all incidents.
 The driller should see that material is available, suitable and safe for the job.

Candidate Requirements

1.Must have Valid Driller Level Well Control
2.Must have a good experience in Drilling & work over rigs
3. Preferred Engineering Gradua Graduate

Skills Required

Job is expired

DISCLAIMER: Dear Candidate! You are fully responsible to deal with the employer on the hiring process. will not take any responsibility on your hiring process. Genuine employer does not ask money for hiring!

Related Jobs

Like us on Facebook